[INCH-POUND]
A-A-52030
9 May 1991
COMMERCIAL ITEM DESCRIPTION
NOZZLES, FUEL AND OIL SERVICING, NONAUTOMATIC SHUTOFF
AND NOZZLES, FUEL SERVICING, AUTOMATIC SHUTOFF
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specification MIL-N-52110F.
This description covers automatic shutoff nozzles used for dispensing liquid fuel and nonautomatic shutoff nozzles used for dispensing liquid fuel and oil.
Salient characteristics:
Design. The nozzles, intended for attachment to fuel hoses, shall consist of a spout, a control device as specified herein, and body. When specified, the body shall be designed to accommodate an arctic mitten as shown in figure 1. The nozzles shall be a commercial product and the latest model of the manufacturer’s standard product that has been manufactured, marketed, and accepted commercially for a minimum period of one year prior to invitation to bid or request for proposal. The manufacturer’s latest product improvements incorporated in their current production nozzles are acceptable. When specific requirements are not stated herein, all items listed as standard equipment in the manufacturers’ published specifications, brochures, and catalogs which are normally furnished to the commercial customer as standard equipment shall be furnished. In addition, the nozzles shall be equipped with optional equipment and accessories as required to comply with the performance requirements specified herein. Optional equipment for the purpose of this document may be defined as equipment not standard or normally furnished with the nozzles but which is available to the commercial customer on an optional basis. Any additional equipment or accessories specified to satisfy military requirements shall be constructed, assembled, and equipped with all components, whether or not specified herein, necessary to enable the unit to function reliably and efficiently in sustained operations. The nozzles shall conform to all Federal laws and regulations applicable for this type of equipment which are in effect on date of award of contract.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and other data which may improve this document should be sent by letter to: Commander, US Army Belvoir Research, Development and Engineering Center, ATTN: STRBE-TSE, Fort Belvoir, VA 22060-5606. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business