[METRIC}
A-A-52589
February 15, 1996
SUPERSEDING
MIL-O-134l7B
12 April 1983
COMMERCIAL ITEM DESCRIPTION
OILERS, AIR LINE, FOR PNEUMATIC TOOLS
The General Servces Administration has authorized the use of this Commercial Item
Description (CID) for all federal agencies.
1. SCOPE. This CID covers two sizes of oilers for use in the air lines of pneumatic tools.
2. CLASSIFICATION. The oilers shall be the following sizes, as specified (see 7.l):
Size 1 - 1/4 liter (1/2 pint)
Size 2 - 1/2 liter (1 pint)
3. SALIENT CHARACTERISTICS
3.1 Description. The oilers shall atomize and feed, in any position, any lubricant or liquid grease
which is suitable for use in pneumatic tools in the temperature range of 43 degrees Celsius
(110 degrees Fahrenheit
to -32°C
The oilers shall be equipped with an adjustable
oil-metering valve and an oil-filler plug.
3.2 Material. Material shall be of the contractor's current commercial product and shall be
subjected to all provisions of this specification.
3.2.1 Material deterioration and control. The oilers shall be fabricated from compatible materials,
inherently corrosion resistant or treated to provide protection against the various forms of
corrosion and deterioration that may be encountered in any of the applicable storage and
operating environments to which the item may be exposed.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business