A-A-50696 Reels, Static Discharge, Grounding, 50 And 75 Foot Cable LengthsThis Commercial Item Description describes industrial type static discharge reels with either 50 or 75 foot cable lengths fully extracted used to dispel static charges from ground support equipment. This Commercial Item Description CID Test Set Synchro provides a crystal controlled phase angle calibration standard. It produces two digitally synthesized, low distortion sine waves. Relative phase angles between two sine wave outputs may be varied by at least 0.002??over the range from ??999.999??. This instrument will provide and measure phase angle signals for development, repair and maintenance of general electronics, navigational aids, satellite and other communications equipment.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

A-A-50696A

4.5 Inspection lot. All units of the same class and style offered to the Government at one time shall be considered a lot for purpose of inspection. No inspection lot shall exceed 500 units. The sample unit shall be one complete reel and-the sample size shall be determined by the Government Quality Assurance Representative, except that the sample size chosen for reliability testing shall not exceed one reel from each inspection lot.

4.6 Examination. Each sample selected in accordance with the inspection lot and sampling requirements, as well as the first article, shall be examined for compliance with salient characteristic requirements specified herein. This element of inspection shall encompass all visual and dimensional measurements.

4.7 Functional Tests.

4.7.1 Electrical resistance. The sample reels shall be tested for compliance with the electrical resistance requirements specified herein.

4.7.2 Reliability. The sample reels shall be tested for compliance with the reliability requirements specified herein. Reels used for reliability testing shall not be included in any Government shipment or order, but shall be retained for two years beyond the completion of the contract along with all records of inspection and testing.

4.8 Certification.

4.8.1 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer's own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

4.9 Warranty.

4.9.1 Manufacturer/Contractor/Vendor warranty. The manufacturers' and suppliers' standard warranties shall be furnished at no additional cost to the Government.

4.10 Metric.

4.10.1 Metric products. Reels manufactured to metric dimensions will be considered

on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this Commercial Item Description are met.

If a product is manufactured to metric dimensions; and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable.

The contracting officer has the option of accepting or rejecting the product.