For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-PRF-83041 Filter-Separator, Liquid Fuel, Skid Mounted Ffu-15/EThis performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute \(gpm\) ┬▒10%. This FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit for refueling aircraft.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11


MIL-PRF-83041C
SPECIFICATIONS
FEDERAL
A-A-52592
- Pipe Fittings: One or More Ends Grooved
A-A-52598
- Couplings, Clamp, Pipe; with Bolts and Synthetic-Rubber Gaskets for
Grooved-End Pipe
A-A-55804
- Rods, Ground (with Attachments)
A-A-59326
- Coupling Halves, Quick Disconnect, Cam-Locking Type
DEPARTMENT OF DEFENSE
MIL-DTL-5624 -
Turbine Fuel, Aviation, Grades JP-4, and JP-5/JP-8 ST
MIL-PRF-25017 -
Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble
MIL-DTL-83420 -
Wire Rope, Flexible, for Aircraft Control
STANDARDS
FEDERAL
FED-STD-595 -
Colors Used in Government Procurement
DEPARTMENT OF DEFENSE
MIL-STD-130 -
Identification Marking of U.S. Military Property
(Unless otherwise indicated, copies of the above specifications, standards, and handbook are available
from the Defense Automated Printing Service (DAPS), 700 Robbins Avenue, Building 4D, Philadelphia,
PA 19111-5094, phone 215/697-2197).
2.3 Non-Government documents. The following document(s) form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are
those listed in the issue of DoDISS cited in the solicitation. Unless otherwise specified, the issues of the
documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN PETROLEUM INSTITUTE (API)
API Bulletin 1581 - Aviation Jet Fuel Filter/Separators, Specification and Qualification
Procedures for (DoD adopted).
(Application for copies should be addressed to the American Petroleum Institute, 1220 L Street, NW,
Washington, D.C. 20005, phone 202/682-8000 or FAX 202/682-8030.)
AMERICAN WELDING SOCIETY (AWS)
AWS B2.1-84
- Procedure, Welding, and Performance Qualification, Specification for
(DoD adopted)
AWS D1.2-83
- Aluminum, Structural Welding Code, Standard for (DoD adopted)
(Application for copies should be addressed to the American Welding Society, 550 N.W. LeJeune
Road, Miami FL 33126, phone 305/443-9353 ext.297 or FAX 305/443-5951.)
2



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.