A-A-50474B
15. Marking. Each oiler shall be marked in a plain and permanent manner with the manufacturer’s name or with a trademark of such known character that the source of manufacture may be readily determined.
Quality assurance provisions.
1. Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government.
2. Classification of inspection. The inspection requirements specified herein are classified as first article inspection and quality conformance inspection.
3. First article inspection. The first article inspection shall be performed on one oiler when a first article sample is specified in the contract or order. This inspection shall include examination and operational test as specified herein.
4. Quality conformance inspection. The quality conformance inspection shall be performed on the sample oiler selected in accordance with the inspection lot and sampling requirements. This inspection shall include examination and operational test as specified herein.
5. Inspection lot. All units of the same style offered to the Government at one time shall be considered a lot for purposes of inspection. The sample unit shall be one complete oiler.
6. Examination. Each sample selected in accordance with the inspection lot and sampling requirements and also the first article shall be examined for compliance with salient characteristic requirements specified herein. This element of inspection shall encompass all visual examinations and dimensional measurements.
7. Ordering test. The test shall be an operational test to ascertain that the oiler performs as specified in the salient characteristic requirements. The testing media shall be 10W oil conforming to SAE J300.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product sold in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this CID are met.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business