A-A-52589
3.8 Size 1 (1/4 liter capacity). The oiler shall provide constant and ample lubrication to the working parts of pneumatic tools with an air supply as low as 0.28 liter per min (1/min) (10 cubic feet per minute (cfm)). The inlet and outlet shall be threaded as specified in the contract or order. When specified (see 7.1), the oiler shall have universal, quick-d~sconnect-type hose couplings for both the inlet and outlet connections.
3.9 Size 2 (1/2 liter capacity). The oiler shall provide constant and ample lubrication to the working parts of pneumatic tools with an air supply as low as 1.13 1/min (40 cfm). Threads shall be provided for both the inlet and outlet connections as specified in the contractor or order. When specified (see 7.1). the oiler shall have universal, quick-disconnect-type hose couplings for both the inlet and outlet connections.
3.9.1 Hose assembly. When specified (7.1), the oiler shall be provided with 3 meters (m) (10 feet (ft)) of 19 millimeters (mm) (3/4-inch) air hose, and universal, quick-disconnect-type hose couplings for both ends.
3.10 Workmanship. The quality of workmanship shall be such as to produce oilers that are in accordance with the requirements of this CID and are so constructed as to insure proper functioning of all parts of the oiler.
4. REGULATORY REQUIREMENTS
4.1 Responsibility for inspection. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
6. PACKAGING. Preservation, packing, and marking shall be as specified m the contract or order.
7. NOTES
(This section contains Information of a general or explanatory nature that may be helpful, but is not mandatory.)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business