MIL-C-22587B
The grease cartridges shall be uniform in quality and
3.6 Workmanship.
shall be free from irregularities or defects which would adversely affect
serviceability.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the performance
of all inspection requirements as specified herein. Except as otherwise
specified in the contract or purchase order, the contractor may use his own or
any other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any of the inspections set forth in
the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.2 Classification of inspections.
The inspections specified herein are
classified as follows:
a.
Qualification inspection (see 4.3).
b.
Quality conformance inspection (see 4.4).
4.3 Qualification inspection. The qualification inspection tests of the
grease cartridges shall consist of all the examinations and tests of this
specification.
4.3.1 Qualification sample. Qualification test samples shall consist of
eighteen grease cartridges which have been produced by the contractor using
the same production process, procedures, and equipment as will be used in
fulfilling the contract. Samples shall be forwarded to the Commander, Naval
Air Development Center, Warminster, PA 18974, marked Attention: Aircraft and
Crew Systems Technology Directorate (Code 60612). Samples shall be identified
by securely attached durable tags marked with the following information:
Grease Cartridge
TYPE
Qualification samples
Name of manufacturer (plant in which manufactured)
Manufacturer's designation
Date of manufacture
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business