A-A-50202A
acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the
contract.
6. PACKAGING. Preservation, packaging, packing, labeling and marking for the desired level shall be as specified in the contract (see 7.3).
7. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
7.1 Part or Identification Number (PIN). The following part or identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
AA 50202 - 1
Type:
1 - Type I Grease
2 - Type II Oil
CID number
CID designator
7.2 Addresses for obtaining copies of referenced documents.
7.2.1 Government publications. Copies of MIL-PRF-10924, "Grease, Automotive and Artillery", are available from https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The Federal Acquisition Regulation (FAR) may be obtained from https://www.acquisition.gov/far/.
7.2.2 Non-Government publications. Copies of SAE J2360, "Lubricating Oil, Gear
Multipurpose (Metric) Military use", are available from www.sae.org or SAE Customer Service,
400 Commonwealth Drive, Warrendale, PA 15096-0001.)
7.3 Ordering data. Acquisition documents should specify the following:
a. Title, number, and date of this CID.
b. If required, the specified issue of individual documents referenced.
c. Type, National Stock Number (NSN), and quantity of pumps required (see 2 and 3.3). d. Selection of applicable level and packaging requirements (see 6).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business