A-A-50471 Oiler, Hand, Rectangular, Push SidesThe rectangular, push sides, hand oiler shall consist essentially of rectangular body, two washers, and a spout. The body and spout shall be cold-rolled steel or High Density Polyethylene (HDPE) materiel not less than 0.020-inch thick. The oiler shall be leakproof regardless of the position of the spout.

Pages 1 - 2 - 3 - 4 - 5

A-A-50471A

CID base part identification number (PIN). The following PIN procedure is for Government purposes and does not constitute a requirement for the contractor. The PIN to be used for oilers acquired to this CID are created as follows:

Part identification designation A 50471 � X � X

A = Designates a CID

50471 = CID number

X = Finish number

X = Material number

Material

1 = Cold rolled steel

2 = High Density Polyethylene (HDPE)

Finish

1 = Polished w/clear lacquer or varnish

2 = Brass coated or plated w/ clear lacquer or varnish

3 = Copper coated or plated w/ clear lacquer or varnish

4 = Lacquer opaque

5 = Nickel plated

6 = Baked or enamel

Notes. Purchasers should select the preferred options permitted herein and include the following information in procurement documents:

1. Title, number and date of this CID.

2. PIN number required.

MILITARY INTERESTS:

Review Activities

Army - EA

DLA - CS

User Activity

Navy - MC

CIVIL AGENCY COORDINATING ACTIVITIES:

GSA - FSS

PREPARING ACTIVITY:

Navy - YD

Project No. 4930-0311