A-A-50202 - Pump, Bucket, Lubrication, Hand-Operated
This CID covers hand-operated portable bucket pumps furnished with a cover and locking device which fits and dispenses grease or oil from bulk or a standard 35-pound bucket container.
A-A-50470 - Oilers, Hand, Filler
This CID covers the requirements for filler hand oilers intended to be used for filling large oil cups on heavy machinery with heavier oils, such as 30 or 40 grade. The oiler shall be similar to figure 1 and shall be of either cold-rolled steel or copper as specified in the contract or order. The oiler shall consist essentially of a one-piece seamless body with attached bottom, handle, spout, cap, and chain, when specified in contract or order. The oiler shall comply with the requirements of table 1 for the size as specified in the contract or order.
A-A-50471 - Oiler, Hand, Rectangular, Push Sides
The rectangular, push sides, hand oiler shall consist essentially of rectangular body, two washers, and a spout. The body and spout shall be cold-rolled steel or High Density Polyethylene (HDPE) materiel not less than 0.020-inch thick. The oiler shall be leakproof regardless of the position of the spout.
A-A-50473 - Oilers, Hand, Push-Bottom
This CID covers the requirements for push-bottom hand oilers. The oiler shall be of cold-rolled steel. The oiler shall consist essentially of a top section with spring-action bottom, a washer, and a threaded removable spout.
A-A-50474 - Oilers, Hand, Typewriter
This CID covers the requirements for typewriter hand oilers. The oiler shall be of cold-rolled steel. The oiler shall consist essentially of a body, a washer, a threaded removable spout, and a spout cover or spout cap. Shape of the oiler shall be style 1, oval; style 2, cylindrical; or style 3, hemispherical, as specified in the contract or order.
A-A-50477 - Oilers, Hand, Pump
This CID covers the requirements for hand-operated pump oilers. Configuration of the oiler shall be class A, lever-operated pump oiler, with handle; class B, lever-operated pump oiler, without handle; or class C, plunger-operated pump oiler, with handle, as specified in the contract or order.
A-A-50696 - Reels, Static Discharge, Grounding, 50 And 75 Foot Cable Lengths
This Commercial Item Description describes industrial type static discharge reels with either 50 or 75 foot cable lengths (fully extracted) used to dispel static charges from ground support equipment. This Commercial Item Description (CID) Test Set Synchro provides a crystal controlled phase angle calibration standard. It produces two digitally synthesized, low distortion sine waves. Relative phase angles between two sine wave outputs may be varied by at least 0.002??over the range from ??999.999??. This instrument will provide and measure phase angle signals for development, repair and maintenance of general electronics, navigational aids, satellite and other communications equipment.
A-A-52030 - Nozzles, Fuel And Oil Servicing, Nonautomatic Shutoff And Nozzles, Fuel Servicing, Automatic Shutoff
A-A-52556 - Oil Gun, Pneumatic
This CID covers a hand-operated, pneumatic oil gun designed to produce degrees of atomization from a fine spray or mist to a coarse spray of oil. The oil gun is designed for use in spray application of oils to automotive, cleaning, degreasing, air dusting, lubricating oils, spraying kerosene and other cleaning solvents.
A-A-52589 - Oilers, Air Line, For Pneumatic Tools
This CID covers two sizes of oilers for use in the air lines of pneumatic tools.
API-STD-614 - Applications, Special-Purpose For Lubrication, Shaft-Sealing, And Control-Oil Systems
This standard covers the minimum requirements for lubrication systems, oil-type shaft-sealing systems, and control-oil systems for special-purpose applications.
GGG-G-00680 - Grease Gun, Hand, Light Duty
GGG-L-795 - Lubricating Unit, Power Operated, And Pumping Units, Pressure Lubricating, Drum Mounting
GGG-O-591 - Oiler, Hand (S/S By A-A-50470, A-A-50471, A-A-50473, A-A-50474, And A-A-50477)
MIL-A-21430 - Accessory Set Mark 1 Mod 1
This specification establishes the requirements for the procurement of Accessory Set Mark 1 Mod 1, LD 479701, referenced herein as the accessory set.
MIL-A-26891 - Air Elininator Assembly, Recessed, Aircraft Fuel Filter
This specification covers an aircraft fuel filter recessed air eliminator assembly.
MIL-C-15436 - Cans, Oil, And Drip Pans
MIL-C-22587 - Cartridge, Grease, 14 Ounce (For Cartridge-Type Grease Gun) (S/S By Sae-Ams-C-22587)
This specification covers 14 ounce capacity grease cartridges. They are designed for use with cartridge-type grease guns conforming to MIL-G-3859.
MIL-C-23044 - Chest, Collapsible Tank
MIL-C-38479 - Coupling Assemblies, Quick Disconnect, Fuel Grk-15/S32R And Gru-13/E
MIL-C-43044 - Control, Pressure, Filling, Nonvented Drum
This specification covers a pressure shutoff control (valve) with hose assembly used for filling military standard collapsible drums of 500-gallon capacity.
MIL-C-83260 - Coupler, Hydrant Valve Gru-16/E
This specification covers a hydrant valve coupler which will mate with the Cla-Val model 352-AF hydrant adapter and liquid level control valve, as manufactured by the Cal-Val Company, Newport Beach, California 92663.
MIL-D-23795 - Dispensing Assembly Fuel, Hand Driven, Contamination Removing
MIL-D-40078 - Dispensing Pumps, Hand Driven, For Petroleum Products, 12 Gpm Capacity (Use Xx-D-385)
MIL-D-40120 - Dispenser, Oil, Hand Operated
MIL-D-43016 - Dispensing Pump, Hand Driven, Fuel Transfer (Use Xx-D-385)
MIL-D-43095 - Dispensing Pump, Hand Driven, Piston Type (Use Xx-D-385)
MIL-D-43149 - Drum And Pump Units, Liquid Dispensing, Tracked Carrier Mounting
This specification covers two types of liquid dispensing drum and pump units for mounting in a tracked cargo carrier, 6-ton capacity, M548 for refueling tactical equipment in the field.
MIL-D-43268 - Drain Unit, Waste Oil, Portable
This specification covers one type of portable drain unit for receiving waste oil or grease from automotive transmissions, rear ends, and engine pans.
MIL-D-43278 - Dispenser, Graphite
This specification covers a disposable dispenser containing graphite.
MIL-F-23743 - Fuel System, Amphibious Assault And Tactical Airfield Fuel Dispensing System, General Specification For (Use Mil-F-28929)
MIL-F-26887 - Fuel Servicing Unit, Aircraft, Trailer Mount, Type Mh-2A (Trailer, Fuel Transfer, Filter-Meter-Hose, Type Mh-2A)
MIL-F-27501 - Feeder, Chemical Solution, Jet Fuel, Anti-Icing Inhibitor Gru-5/E
MIL-F-27511 - Fuel Servicing Unit, Aircraft Grk-11/E32R-1
MIL-F-27703 - Filter-Separator Element Kit, Liquid Fuel Ffu-9/E
This specification covers one type of liquid fuel filter-separator element kit, designated FFU-9/E.
MIL-F-27704 - Filter-Separator Element Kit, Liquid Fuel Ffu-7/E
MIL-F-27705 - Filter-Separator Element Kit, Liquid Fuel Ffu-8/E
MIL-F-27706 - Filter-Separator Element Kit, Liquid Fuel Ffu-10/E
MIL-F-27716 - Filter Element, Fluid Pressure Mxu-148/E
MIL-F-27717 - Filter Element, Fluid, Pressure Ffu-147/E
MIL-F-27859 - Filter Element, Fluid, Pressure Mxu-152/E (S/S By Mil-F-83428)
MIL-F-28559 - Filter/Separator, Liquid Fuel, 600 Gpm Capacity, Skid Mounted (S/S By Mil-F-52694)
MIL-F-28570 - Fuel Servicing Unit, Aircraft, Trailer Mounted, 600 Gpm, Air Transportable
This specification covers a trailer-mounted unit used for transferring and filtering hydrocarbon fuels for direct aircraft fueling and defueling operations.
MIL-F-28929 - Fuel System, Tactical Airfield, Dispensing, General Specification For (S/S By Mil-F-82129)
MIL-F-38016 - Filter Element, Fluid, Pressure Mxk-235/S32R-2
MIL-F-38029 - Filter-Separator Element Kit, Liquid Fuel Ffu-12/E
MIL-F-43093 - Fuel System Supply Point: Portable
This specification covers a portable fuel supply system which when combined with three collapsible fabric tanks (in any combination of 3,000, 10,000, or 20,000 gallon capacities), two 350 GPM pumps; and two 350 GPM filter separators, is capable of receiving, dispensing, and storing automotive gasoline, aviation gasoline, jet fuel, or diesel fuel.
MIL-F-4909 - Filter Element, Aircraft Servicing, General Specification For (S/S By Mil-F-8901)
MIL-F-52643 - Forward Area Refueling Equipment System (Fare) (Use Mil-F-52749)
MIL-F-52749 - Forward Area Refueling Equipment (Fare)
This specification covers a portable fuel-dispensing system for use in forward areas to refuel aircraft, ground vehicles, and other powered equipment.
MIL-F-82129 - Fuel System, Amphibious Assault And Tactical Airfield Dispensing, General Specification For
This specification covers assemblies and components of 4- and 6-inch portable amphibious assault fuel systems and tactical airfield fuel dispensing systems.
MIL-F-82158 - Fuel Ferrying Assembling, 1,600 Gallon Capacity
MIL-F-82165 - Fuel Monitors:, Frame Mounted 100- & 350- Gallon Per Minute Capacities
This specification covers requirements for fuel monitors for use downstream of 100 gallon per minute (gal/min) and 350 gal/min filter-separators.
MIL-F-82191 - Fuel Hose Evacuation Kits
This specification covers fuel hose evacuation kits.
MIL-F-83028 - Fuel Servicing Unit, 600 Gpm, Trailer Mounted A/S32R-14, Air Transportable
MIL-F-83159 - Filter-Separator, Liquid Fuel, Skid Mounted Ffu-16/E, 300 Gpm
MIL-F-83274 - Fuel Delivery System, Bulk, Airborne, General Requirements For
MIL-F-83280 - Filter Separator Conversion Kit Kmu-264/E
MIL-F-87246 - Fuel Servicing Systems, Aircraft Ground, Mobile
This specification establishes the development requirements and verifications for mobile aircraft ground fuel servicing systems.
MIL-G-11300 - Grease Gun Kit, Pneumatic
MIL-G-16566 - Gun, Lubricating, Pressure, Hand Operated (S/S By Mil-G-3859)
MIL-G-1833 - Guns, Lubricating, Pressure, Hand-Operated, And Fittings (Shipboard Use) (Superseded By Mil-F-3541)
MIL-G-22588 - Grease Gun, Hand, Cartridge-Type High Pressure, Lever Operated (Use Mil-G-3859)
MIL-G-3805 - Grease Gun, Hand, 3-Oz. Capacity, High-Pressure, Push Type, Spring-Primed (Use Mil-G-3957)
MIL-G-3859 - Grease Gun, Hand Operated, Lever, Push And Screw Type
MIL-G-3859/1 - Grease Gun, Hand Operated, Lever, Push & Screw Type; Type I, Lever Operated
MIL-G-3859/2 - Grease Gun, Hand Operated, Lever, Push And Screw Type; Type Ii, Push Operated
MIL-G-3859/3 - Grease Gun, Hand Operated, Lever, Push And Screw Type; Type Iii, Screw Operated
MIL-G-3859/4 - Grease Gun, Hand Operated, Lever, Push & Screw Type; Type Iv, Pistol Grip
MIL-G-3882 - Guns, Fluid, Direct Delivery
MIL-G-3957 - Grease Guns, Hand, Push Operated (S/S By Mil-G-3859)
MIL-G-4237 - Grease Gun, Hand, High Pressure (Use Mil-G-3805)
MIL-G-43264 - Grease Guns, Hand, Screw-Operated (8-Ounce Capacity) (S/S By Mil-G-3859)
MIL-G-43270 - Grease Gun, Pneumatic, 1 Pound Capacity
MIL-G-952 - Guns, Spray, Oil And Solvent (S/S By Sae-Ams-G-952)
MIL-H-27517 - Hydrant Refueling System, Air Transportable Af/E32R-1
MIL-H-38209 - Hose Reel Assembly, Fuel Servicing, General Requirements For
This specification covers the general requirements for the design and construction of a fuel servicing hose reel assembly that will accommodate standard diameter hoses, 1-1/2 through 4-inch size.
MIL-H-38428 - Hose Assembly, Polyurettane Rubber, Fuel, Collapsible Low Temperature, With Reattachable Couplings
MIL-L-10269 - Lubricating And Servicing Unit, Power-Operated, Portable
This specification covers a lubricating and servicing unit (hereinafter called lubricator) for installation on a trailer chassis. The lubricator shall dispense lubricants and supply compressed air for the maintenance of equipment under both normal and extreme climatic conditions.
MIL-L-13603 - Lubricating Unit, Power-Operated Air (Capacity 25-50 Pounds) (Use Ggg-L-795)
MIL-L-17947 - Lubricator, Mechanical Forced Feed, Sight Type
MIL-L-19355 - Lubricating And Servicing Unit, Power-Operated Portable, Industrial Type (S/S By Oo-L-2788)
MIL-L-21324 - Lubricating Unit, Power Operated, And Pumping Units, Pressure Lubricating, Drum Mounting (Use Ggg-L-795)
MIL-L-22384 - Lubricating Unit, Power Operated (Use Ggg-L-795)
MIL-L-28979 - Lubricating And Servicing Unit, Power Operating, Skid Mounted
This specification covers one type of power-operated, skid-mounted lubricating and servicing unit.
MIL-L-3910 - Pump, Bucket, Lubricating (Use Mil-P-13218)
MIL-L-40142 - Lubricating Unit, Hand Operater, Light Oil
MIL-L-43131 - Lubrication Unit, Power Operated, Battery, Portable
MIL-L-43185 - Lubricant Packer, Bearing (For Motor Blower, Frequency Shift Converter Cv116/Urr)
MIL-L-4387 - Lubrication Dispensing Equipment Accessories
This specification covers accessories used with powered and hand-operated lubricating equipment.
MIL-L-45028 - Lubricant Packers, Bearing
MIL-L-4573 - Lubricating And Servicing Unit, Power Operated, Motor Vehicle
MIL-L-45800 - Lubricant Packer, Bearing
MIL-M-23045 - Meter Assembly, Skid Mounted (S/S By Mil-M-82180)
This specification covers the requirements for one type skid mounted, portable, self-contained meter assembly.
MIL-M-38320 - Modification Kit, Liquid Fuel - Filter /Separator Kmu-214/E (Use Mil-F-83280)
MIL-M-82180 - Meter Assemblies, Skid-Mounted: Petroleum Fuels
This specification covers skid-mounted, portable, self-contained meter assemblies.
MIL-M-83049 - Modification Kit, Liquid Fuel Filter-Separator Kmu-348/E
MIL-N-26978 - Nozzle, Fuel & Oil Servicing, Over The Wing, Shockproof, Type Md-1 & Md-2 (S/S By Mil-N-87963)
MIL-N-27346 - Nozzle, Pressure Fuel Servicing, Aircraft, Nominal 4&Inch Diameter
MIL-N-38439 - Nozzle, Water Hose, Servicing, Aircraft Grk-14/S32A-2
This specification covers a demineralized water servicing nozzle, designted GRK-14-S32A-2.
MIL-N-4180 - Nozzle, Fuel And Oil Servicing (Use Mil-N-26978)
MIL-N-52110 - Nozzles, Fuel And Oil Servicing, Nonautomatic Shutoff And Nozzles, Fuel Servicing, Automatic Shutoff (S/S By A-A-52030)
This specification covers automatic shutoff nozzles used for dispensing liquid fuel and nonautomatic shutoff nozzles used for dispensing liquid fuel and oil.
MIL-N-52111 - Nozzle Fuel Servicing, Non-Automatic, Aluminum (S/S By Mil-N-52110)
MIL-N-5877 - Nozzle, Pressure Fuel Servicing, Locking, Type D-1, D-1R, D-2 And D-2R, Nominal 2 1/2 Inch Diameter (S/S By Sae-As5877)
This document specifies the requirements for four types of locking pressure fuel servicing nozzles, designated Types D-1, D-1R, D-2 and D-2R, which have a nominal inlet diameter of 2 1/2 inches.
MIL-N-87963 - Nozzle: Fuel, Aircraft, Overwing: Type Md-3
This specification covers one kind of shockproof, overwing, aircraft, fuel servicing nozzle, designated Type MD-3.
MIL-O-13417 - Oiler, Air Lines, For Pneumatic Tools (S/S By A-A-52589)
This specification covers two sizes of oilers for use in the air lines of pneumatic tools.
MIL-O-14559 - Oil Gun, Pneumatic (S/S By A-A-52556)
MIL-O-26995 - Over&Wing Servicing Kit, Mh&2A Filter&Meter&Hose Fuel Transfer Trailer
MIL-O-43345 - Oilers, Self-Feeding
MIL-O-4494 - Oiler, Airline
MIL-O-45029 - Oiler, Hand, Pistol Grip Handle (S/S By Ggg-0-591)
MIL-O-52724 - Oilers, Hand, Plastic (S/S By A-A-50477 And A-A-50473)
MIL-O-82042 - Oilers, Airline (S/S By A-A-50492)
MIL-P-10406 - Pumps, Automotive Fuel Dispensing, (Service Station) (S/S By Ul87 And Nbs Hdbk 44)
This specification covers electric-motor-driven automotive fuel dispensing service station pumps.
MIL-P-13218 - Pump, Bucket, Lubrication, Hand-Operated (S/S By A-A-50202)
This specification covers hand-operated, self-contained portable bucket pumps which dispense grease and oil from bulk or standard bucket containers.
MIL-P-16934 - Pumping Units, Centrifugal, Shipboard Aircraft Fueling Defueling
MIL-P-21197 - Pumping Unit, Hydraulic Fluid Hd-259/Dsm
MIL-P-23511 - Pre-Oiling And Pressure Fill Tank 3 Gallon Capacity Type Pon-6
This specification covers one type of 3-gallon capacity, portable, jet oil servicing unit designated Type-PON-6.
MIL-P-27514 - Pumping Assembly, Flamable Liquid, Bulk Transfer Pmk-15/E32R-1
MIL-P-27515 - Pumping Assembly, Flamable Liquid, Bulk Transfer Pmk-16/E32R-1
MIL-P-43253 - Pump, Lubricant Transfer (Hand)
MIL-P-45046 - Pumps, Lubricant Transfer, High- And Low-Pressure, With Drum Cover Assembly
MIL-P-45050 - Pumping Unit, Pressure-Lubricating, Drum Mounting, Air-Operated (S/S By Ggg-L-795)
MIL-P-52493 - Pump, Fuel System, Auxiliary, Engine Supply
MIL-PRF-26873 - Suppressor, Surge, Fuel Transfer Trailer
This specification covers a fuel transfer trailer surge suppressor.
MIL-PRF-38266 - Tank And Pump Unit, Liquid Dispensing, Portable, Pmu-29/E
This specification covers one type of dolly mounted, 3-gallon capacity, jet oil servicing tank and pump unit with 2-gallon overflow tank, designated PMU-29/E.
MIL-PRF-40136 - Tank And Pump Unit, Fuel Dispensing, For Truck Mounting, And Single Tank Unit, Fuel Dispensing, 525-Gallon, Trailer Mounted
Abstract. This specification covers a bottom loading, fuel dispensing, double tank and pump unit for truck mounting, and a single tank for trailer mounting.
MIL-PRF-4541 - Lubricating And Servicing Unit, Air Operated High And Low Pressure Delivery
This document covers an air operated, lubricating and servicing unit for dispensing general purpose lubricants, gear and engine oils and chassis grease.
MIL-PRF-52747 - Nozzle Assembly, Closed-Circuit Refueling, Standard And Arctic Service
This specification covers two types of closed-circuit fuel servicing nozzle assemblies.
MIL-PRF-52748 - Nozzle, Adapter, Closed-Circuit To Gravity Fill, Standard And Arctic Service
This specification covers two types of nonautomatic shut-off nozzles intended for adapting a closed-circuit reflueling (CCR) nozzle, conforming to MIL-N-52747 to perform conventional open port or gravity fill dispensing of liquid hydrocarbon fuels (see 6 1).
MIL-PRF-81380 - Filter/Monitor, Contamination, Aviation Fuel Dispensing System
This specification covers aviation fuel contamination filter/monitor elements and housings.
MIL-PRF-83041 - Filter-Separator, Liquid Fuel, Skid Mounted Ffu-15/E
This performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute (gpm) ┬▒10%. This FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit for refueling aircraft.
MIL-R-15835 - Reel, Fueling Hose, Power Rewind (S/S By Mil-R-15917)
MIL-R-15917 - Reels, Manually Operated Fuel Hose (S/S By Astm-F1347)
This specification covers manually operated fueling hose reels.
MIL-R-23047 - Regulator Assembly, Pressure, Skid Mounted
MIL-R-26872 - Reel, Static Discharge Grouning (S/S By Mil-R-38489)
MIL-R-38489 - Reel, Static Discharge, Grounding Rmu-18/E (Use Mil-R-83232, /1, /2, /3, /4 And Mil-R-83325)
MIL-R-45066 - Reel And Hose Assemblies, Lubricant-Dispensing
MIL-R-53076 - Refueling System, Aviation, Hemtt Tanker (Refueling System)
This specification covers a refueling system tank is deployed in conjuction with the Heavy Expanded Mobility Tactical Truck (HEMTT) tanker to refuel helicopters. The system consists of dry break couplings, fittings, light weight hose, and nozzles in quantity that allows for the deployment of a four station refueling system.
MIL-R-81510 - Refueling System, Helicopter, Advance Base, Air Transportable
MIL-R-82184 - Regulator Assembly, Skid Mounted: 6-Inch
This specification covers a skid-mounted, portable, self-contained regulator assembly.
MIL-R-83153 - Refueling System, Air Transportable A/E32R-15, 300 Gpm (Use Mil-R-83211)
MIL-R-83169 - Refueling Unit, Portable, Aircraft A/E32R-16, 100 Gpm (Use Mil-R-83244
MIL-R-83211 - Refueling System, Air Transportable, Trailer Mounted A/M32R-25, 300 Gpm
MIL-R-83232 - Reels, Static Discharge, Grounding, 50 Foot, General Requirements For (S/S By A-A-50696)
This specification covers static discharge grounding reels with 50 feet of grounding cable, furnished with grounding hardware on the free cable end as specified in the applicable specification sheet.
MIL-R-83232/1 - Reel, Static Discharge, Grounding Rmu-20/E, 50 Foot With Clip (S/S By A-A-50696)
MIL-R-83232/2 - Reel, Static Discharge, Grounding Rmu-25/E, 50 Foot With Connector (S/S By A-A-50696)
MIL-R-83232/3 - Reel, Static Discharge, Grounding Rmu-26/E, 50 Foot With Plug (S/S By A-A-50696)
MIL-R-83232/4 - Reel, Static Discharge, Grounding Rmu-27/E, 50 Foot Without Connecting Hardware (S/S By A-A-50696)
MIL-R-83244 - Refueling System, Air Transportable, Trailer Mounted A/M32R-26, 100 Gpm
MIL-R-83325 - Reel, Static Discharge, Grounding Rmu-28/E, 75 Foot Without Connecting Hardware
MIL-S-1249 - Syringe, Oil
MIL-S-26871 - Swivel Adapter, With Vacuum (Use Mil-C-38179)
MIL-S-26879 - Strainer, Sediment, Aircraft Refueling Line, 600 Gpm (S/S By Mil-S-27661)
MIL-S-28904 - Strainer Assembly, Skid Mounted
This specification covers requirements for one type, 4-inch skid mounted strainer assembly.
MIL-S-505 - Semitrailer, Tank, (Steel, 1,500 Gallon, Water)
MIL-S-5609 - Syringe, Oil-Dispensing (Plastic)
MIL-S-8011 - Segregator, Fluid, Type D&5
MIL-S-82183 - Strainer Assembly, Petroleum Fuels, 6-Inch, Frame-Mounted, 600 Gallons Per Minute
This specification covers a 6-inch, parallel-flow frame-mounted, 600-gallon-per-minute (gpm) strainer assembly.
MIL-S-8434 - Steering Mechanism Kit, Modification, For K&1 Trailer
MIL-STD-848 - Fuel Sample Laboratory Analysis For Fibers (Use Mil-F-8901)
MIL-T-18847 - Tank, Fuel, Aircraft, Auxiliary External, Design And Installation Of
This specification covers requirements for the design, test, and installation of auxiliary external aircraft fuel tanks.
MIL-T-22564 - Tank, Liquid Storage, Metal Skid Mounted, 800 Gallon Capacity
MIL-T-26697 - Tank And Pump Unit, Liquid Dispensing, Portable, 10 Gallon Capacity, Type Lbu-1-E
MIL-T-26858 - Tank And Pump Unit, Liquid Dispensing, Portable, 3 Gallon Capacity, Type Mb-2
MIL-T-26876 - Tank, Calibrating And Proving, Aircraft Fuel Servicing Meter, 600 Gallon Capacity, Type Md&1
MIL-T-26965 - Tank And Pump Unit, Liquid Dispensing, 110 Gallon Capacity, Trailer Mounted, Type Mb-3
MIL-T-27509 - Trailer, Fuel Hose Grk-8/E32R-1
MIL-T-27510 - Trailer, Fuel Hose Grk-9/E32R-1
MIL-T-27513 - Trailer, Collapsible Fuel Tank Grk-10/E32R-1
MIL-T-82123 - Tank, Fabric, Collapsible, 20,000 Gallon, Petroleum (S/S By Mil-T-52983)
MIL-T-83258 - Test Set, Flow Rate, Fuel Tank Ttu-298/E
MIL-T-83275 - Tank, Bulk Fuel, Air Delivery
MIL-T-9017 - Gun, Oil Spray, Aircraft Engine, Corrosion Prevention, Type A-1
MIL-T-9178 - Tank, Preoiler, Aircraft Engine, Type B-1A
MIL-V-26868 - Valve, Check, Fuel Transfer Trailer, 200 Gpm
MIL-V-26880 - Valve, Diaphragm Actuated, Hydraulically Operated, Pressure Reducing And Check
MIL-V-38444 - Valve, Diaphragm, Stop Vak-26/E32R-14
MIL-V-64051 - Vacuum Pump, Hand Operated For Army Oil Analysis Program (Aoap)
MS15489 - Lubricant Pump - Bucket Type Hand Operated (25 Pound Capacity)
MS15760 - Oiler, Hand, Pump, Flexible Spout, Pistol-Grip
MS15761 - Oiler, Hand, Filler
MS15762 - Oiler, Hand, Pump, Bent Rigid Spout, Pistol&Grip
MS15763 - Oiler, Hand, Pump, Bent, Rigid Spout, Handle Grip
MS15764 - Oiler, Hand, Push-Button, Straight Rigid Spout, Cut Thread Closure
MS15765 - Oiler, Hand, Bent, Rigid Spout, Push-Botton, Cut Thread Closure
MS15766 - Oiler, Hand, Pump, Flexible Spout, Handle Grip
MS15767 - Oiler, Hand, Pump, Flexible Spout, Handle Grip
MS24200 - ( Images) Adapter, Pump
MS24201 - Adapter Loader
MS24202 - Valve-Loader
MS24203 - ( Images) Coupling, Grease Gun; Shafer Type Nozzle
MS24204 - ( Images) Adapter, Grease Gun Coupling; Hydraulic Type Inlet Fitting, Pin Type Nozzle
MS24205 - ( Images) Coupling, Grease Gun; Flush Type Nozzle
MS24206 - ( Images) Sleeve, Locking
MS24207 - ( Images) Coupling, Grease Gun, Hydraulic Type Nozzle
MS24682 - Nozzle, Pressure Fuel Servicing - Aircraft
MS24685 - Coupling - Nozzle End, Pressure Fuel Servicing, Nozzle, Outline Of
MS24686 - Coupling - Hose End, Pressure Fuel Servicing, Nozzle, Outline Of
MS24687 - Ring - Split, Coupling, Pressure Fuel Servicing, Nozzle
MS29520 - ( Images) Envelope Dimensions Nozzle, Pressure Fuel Servicing Locking Aircraft, Type D-1, D-1R, D-2 And D-2R
MS35139 - Grease Gun, Hand, 3 Oz. Capacity, High Pressure, Push Type, Spring Primed
MS35142 - Head, Grease Gun (15 And 21-Ounce)
MS35145 - Lever, Grease Gun (15 And 21-Oz)
MS35149 - Barrel, Grease Gun (15 And 21-Oz)
MS35150 - Follower, Grease Gun (15 And 21-Oz)
MS35151 - Follower Rod, Grease Gun (15 And 21-Oz)
MS35152 - Handle, Follower Rod, Grease Gun (15 And 21-Oz)
MS35153 - Cap, Grease Gun (15 And 21-Oz)
MS35155 - Piston, Grease Gun (15 And 21-Oz)
OO-L-2788 - ( Images) Lubricating And Servicing Unit, Power-Operated, Portable, Industrial Type
This document covers a portable, platform-mounted, air-operated lubricating unit (hereinafter referred to as the unit) consisting of a diesel-engine-driven air compressor, lubricant pumps, hose reels, and other equipment necessary to form a complete, self-contained unit suitable for dispensing lubricants directly from standard refinery drums.
QPL-003910-2 - Lubricant Pump, Bucket Type, Hand Operated (Capacity 25 Pounds)
QPL-15835-2 - Reel, Fueling Hose, Power Rewind
QPL-15917-2 - Reel, Rubber Hose, Manual Operated
QPL-22587-6 - Cartridge, Grease, 14 Ounce (For Cartridge Type Grease Gun) (S/S By Sae-Ams-C-22587)
QPL-26521-11 - Hose Assembly, Rubber, Fuel, Collapsible, Low Temperature, With Reattachable Couplings
QPL-3910 - Lubricant Pump, Bucket Type, Hand Operated (Capacity 25 Pounds)
QPL-5877-14 - Nozzle, Pressure Fuel Servicing, Locking Type D-1 And D-2, Nominal 2 1/2 Inch Diameter (S/S By Qpl-As5877)
QPL-6615-18 - Hose, Rubber, Gasoline, With Reusable Couplings, Low Temperature
QPL-81380-5 - Monitor Contamination, Fuel Dispensing System (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
RR-C-87 - Cans, Oil (Typewriter) (S/S By Ggg-0-591)
RR-O-00376 - Oiler, Hand
RR-O-376 - Oiler, Hand (S/S By Ggg-O-591)
XX-D-370 - Dispensing Pump, Hand Driven, Drum, 1 Quart Oil, (For 15- To 55 Gallon Drums)
This specification covers a hand-operated pump, (hereafter called ??pump unit??) for dispensing 1 quart of oil per cycle from 15- to 55-gallon drums.
XX-D-385 - Dispensing Pump, Hand Driven, Liquid Petroleum Fuel
XX-P-00100 - Pumps, Centrifugal (Gasoline-Engine-Driven, Integral Self-Priming)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business